Home
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request
Quote
All Products
from this brand
Multiformat HD/SD-SDI Waveform Monitor/Vectorscope
Model: TVM-4DG
- Two passive looping HD/SD-SDI inputs with auto-detection of input format
- External reference input accepts blackburst or tri-level sync
- Simple operation
- On-screen display of picture, waveform, vector gamut or timing
- Low power consumption
Product Info
Tech Specs
Documents
The TVM-4DG multiformat waveform monitor/vectorscope is an easy-to-operate tool for monitoring HD-SDI (1080 and 720) and SD-SDI (525 and 625) signals and is housed in a convenient half-rack scope package. The display can show any one of the following: waveform, vector, picture or Videotek® patented timing display.
- Two passive looping HD/SD-SDI inputs with auto-detection of input format
- External reference input accepts blackburst or tri-level sync
- Simple operation
- On-screen display of picture, waveform, vector gamut or timing
- Low power consumption
- Convection cooled (no fan)
- LED backlit display (no mercury)
- GPI control of input and function selection
- Standards supported: SMPTE 292M, SMPTE 259M-C
- Connector: 15-pin D-sub female
- Connectors: 4 BNC, Hi-Z looping
- Control:
- Depth: 16.63 in
- Display:
- Height: 5.25 in
- Input Impedance: 10 k ohms returned to +5 V
- Power Requirements:
- Storage Temperature: -40° to 65° C
- Video:
- Width: 8.25 in
- Power Input: 90 to 260 V AC, 50/60 Hz, nominal
- Waveform Accuracy: ±1%
- Vector Accuracy: ±1°
- Return Loss: =-15 dB, 5 MHz to 1.485 GHz
- Operating Altitude: 6562 ft (2000 m)
- AC Voltage: 260 Volts
- Data Rate: 1.485 Gb/s, 270 Mb/s auto-detect
- Humidity: 90% maximum (non-condensing)
- Signal Level: NTSC: blackburst 286 mV pk-pk ±6 dB, PAL: sync and burst 300 mV pk-pk ±6 dB and Tri-level: 600 mV pk-pk ±3 dB
- Level: 800 mV, nominal
- Environmental:
- GPI: Input selection, function selection, momentary closure
- Reference:
- Waveform: YCbCr, RGB, YRGB, Digital as composite
- General: Picture, waveform, vector, gamut or timing
- Peak Power: 25 Watt
- Product Weight: 5 lbs
- Sweep Time Base: 1 H, 2 H or 3 H with x1, x5, x10 magnification, 1 V, 2 V or 3 V with x1, x5, x10, x25 magnification
- Vector: Cr vs. Cb
- INPUT: NTSC/PAL blackburst or composite video, tri-level sync auto-detect (per SMPTE 274M)
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Pollution degree: 2
- Return Loss.: =-40 dB, 100 kHz to 5 MHz
- Inputs A and B (Digital): 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/24, 720p/23.98, 525/59.94 or 625/50 auto-detect
- Connectors.: 2 BNC, Hi-Z looping
- VFLASH: Ethernet port for firmware updates
- Tester Format - Standalone Component (Box)
- Meter/Monitor Type - Video
Waveform Monitor
85 kb
- Data Sheet
Request Quote
Suggested Products
by
Network Technologies Inc (NTI)
by
Network Technologies Inc (NTI)
by
Network Technologies Inc (NTI)
Thank you!
Someone will be in touch with you shortly.
Contact American Hi-Res
close
American Hi-Res
47 Lee Avenue
Dover, NJ 07801
USA
(973)586-4410
www.ahrav.com
Contact in regards to this product:
Imagine Communications
Model: TVM-4DG
Request more information from a dealer near you
close
Request more information from a dealer near you
Footer
