Home
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Utility Audio Amplifier - 2 Watt
Series:
Model: ST-PA2
- 2 Watts RMS into 8 ohm
- +12 dBu Into 600 ohm
- Quality Utility Amplifier
- Intercom Driver
- Music-On-Hold Driver
Product Info
Tech Specs
Related Products
Documents
Accessories
The ST-PA2 features a single, unbalanced audio input, a gain control, and two outputs. The first output is designed to deliver a clean 2 watts RMS into an 8 ohm speaker. The second output is intended to drive 600 ohm transformers, typically on equipment inputs. This makes the ST-PA2 uniquely suited to applications such as music-on-hold inputs on telephone systems which may have either 8 ohm or 600 ohm inputs. If desired, both outputs may be used at the same time.
- 2 Watts RMS into 8 ohm
- +12 dBu Into 600 ohm
- Quality Utility Amplifier
- Intercom Driver
- Music-On-Hold Driver
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Noise:
< -80 dB (8 ohm @ 2 W RMS)
< -70 dB (600 ohm, referred to +4 dBu) - Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 30 kHz
- Maximum Frequency Response (Bandwidth): 30000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Number of Inputs: 1
- Number of Outputs: 2
- Total Harmonic Distortion + Noise (THD+N): 0.75 %
- Inputs: Unbalanced 10 k ohm
- Input Level:
-15 dBV minimum (for rated power output)
-20 dBV minimum (for 1 watt RMS into 8 ohm - THD+N: < 0.75 % 0.5% typical
- Power Requirement: 24 to 33 VDC
FP-NML2
- Network to Mic/Line Interface
FP-NML2P
- Network to Mic/Line Interface with PoE
FP-NML2V
- Network to Mic/Line Interface with VCA
FP-NML2VP
- Network to Mic/Line Interface with VCA, PoE
FP-PA20
- Power Amplifier - 20 W 8 ohms
FP-PA20A
- 20 W Mono Audio Amplifier, 70 V or 100 V
RU-PA518
- Power Amplifier 5 W Stereo / 18 W Mono
ST-IC1
- Intercom Amplifier
ST-MA2
- Muting Monitor Amplifier - 2 Watt
ST-PA6
- Audio Power Amplifier - 6 Watt
TX-1W
- Music on Hold Amplifier - 1 Watt
TX-PA40D
- 40 W Stereo Audio Power Amplifier
Utility Power Amplifier
807 kb
- Other
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact AHR Audio Visual, Inc.
close
AHR Audio Visual, Inc.
53 Stickle Ave
Suite 3
Rockaway, NJ 07866
USA
(973)586-4410
www.ahrav.com
Contact in regards to this product:
Radio Design Labs
Model: ST-PA2
Request more information from a dealer near you
close
Request more information from a dealer near you
Footer
