Home
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
Voice-Over / Paging Module - Manual
Series:
Model: ST-VP1
- High-Quality Voice-Over Mixing
- Noiseless Paging
- Single Input Adapted for Paging or Voice-Over
- Selectable Fade-Under or Hard-Cut
- Adjustable Fade DEPTH and RATE
Product Info
Tech Specs
Related Products
Documents
Accessories
The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required. Automatic operation can be achieved when used in conjunction with RDL's® ST-ACR products.
- High-Quality Voice-Over Mixing
- Noiseless Paging
- Single Input Adapted for Paging or Voice-Over
- Selectable Fade-Under or Hard-Cut
- Adjustable Fade DEPTH and RATE
- Soft Audio Switching
- Polar/Pickup Pattern - Other
- Microphone Type - Other
- Noise: < -85 dB (below +4 dBu output)
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 10 Hz
- Minimum Frequency Response (Bandwidth): 0.01 kHz
- Frequency Response(Music): 10 to 20000 Hz (+/- 0.25 dB)
- THD+N: < 0.01 %
- Attenuation when muted: > 65 dB
- Frequency Response(Voice): 30 Hz to 20 kHz (+/- 0.25 dB)
- THD+N: < 0.01 %
- Attenuation when muted: > 80 dB
- Input Level: 4 dBu Balanced (may be connected unbalanced)
- Output Level: +4 dBu balanced (may be connected unbalanced)
- Gain (either input): Unity (balanced input/output)
- Headroom: > 18 dB (above +4 dBu)
- Fade Rate Adj.: 0.3 to 1.3 seconds
- Fade Depth (music input): Adj. 3 to 40 dB
- Power Requirement: 24 to 33 VDC @ 45 mA
Datasheet for Voice-Over / Paging Module - Manual
874751 kb
- Other
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact AHR Audio Visual, Inc.
close

AHR Audio Visual, Inc.
53 Stickle Ave
Suite 3
Rockaway, NJ 07866
USA
(973)586-4410
www.ahrav.com
Contact in regards to this product:
Radio Design Labs
Model: ST-VP1
Request more information from a dealer near you
close
Request more information from a dealer near you